• Brief
  • Specification
  • Products List

Wireless AP Bridges - 2.4G 5.8G Outdoor Bridge

Wireless AP



















Wireless AP Bridge


The WAP100a wireless ap bridge is a carrier class broadband radio supports data rate up to 300 Mbps by using the license free frequency bands. System caters for large bandwidth back haul transportation. Surge protected PoE and harden casing design enables the system for long distance transmission and working under extreme environment.


WAP100a outdoor wireless ap bridge uses the global innovative technology leader, the Atheros chip sets that enable advanced OFDM modulation and ensure the system capable for the LOS and NLOS, long haul point-to-point applications. Spaces diversify technology with spatial multiplexing increases throughput without using additional spectral bandwidth.


To enhance the system security and privacy, the WAP100a outdoor wireless ap bridge is protected by different wireless security features such as WPA (Wi-Fi Protected Access), WPA2 (WPA with advance encryption), 64-bit / 128-bit WEP (Wired Equivalent Privacy) and IEEE 802.1X authentication. It also provides sophisticated IP features, such as STP, NAT, DDNS, DHCP server, SPI firewall, packet and URL filtering. The system management control can be achieved locally and remotely via the user friendly web page, SNMP or telnet. The WAP100a wireless outdoor bridge is the most cost-effective, high speed and high reliable solution.


The WAP100a wireless ap is a 5.8G wireless bridge, comparing to 2.4g wireless bridge, much better performance,


HIGHLIGHTS -- WAP100a Wireless AP Bridge


  • High-capacity and Spectrum Efficiency, up to 300Mpbs net aggregate throughput
  • 5.1/5.8GHz Bridge high capacity Point to Point or Point to Multi-point Long Range- Up to 20 miles (0 to 32Km) Line of Sight Range
  • 100/150/300Mbps on 10km with 27dbi built-in antenna 
  • Cost effective and high performance solution for LOS and NLOS, quick return on investment
  • Atheros chip sets, surged protected PoE and harden waterproof casing Design
  • Plug and Play – No complicated setup required
  • Outdoor Cat5e shielded Cables and Universal Mount for Wall or Pole
  • Security and High Reliability, IP security supports SPI firewall, packet and URL filtering
  • Remote Management and Update Capable



Outdoor Wireless AP Bridge Application


Long Range Backhaul
Links Between Cellular Towers
High bandwidth Last Mile Access
Extend your Wireless or Wired LAN
Video Surveillance Backhaul
Leased Line Redundancy

Download - Wireless AP Bridge

Catalog - Router & Modem


Industrial Class Series


SOHO Class Series

Appearance - Wireless AP
Wireless AP
Chip set: Atheros AR9220

Frequency Range: 5.180 ~ 5.825 GHz

Data Rate: 54 ~ 300 Mbps

Transmitter Output Power: 16 ~ 26 dBm

Receiver Sensitivity: - 90 dBm @ 6 Mbps, - 70 dBm @ 300 Mbps

Antenna Gain (Built-in): 26 dBi


Wireless Security
64-bit / 128-bit WEP/WPA-EAP / WPA-PSK / WPA2-EAP / WPA2-PSK/IEEE 802.1X ¨C TLS, TTLS, PEAP, EAP-SIM
Long Distance Parameters Setup
Wireless Pseudo VLAN
CSW (Configurable RF Channel Spectrum Width)
MCS (Modulation Coding Scheme)
TPC (Transmit Power Control)

IP Services:
STP (Spanning Tree Protocol)
SAT (Static Address Translation)
SPI Firewall, Packet Filtering, URL Filtering

HTTP WebŁŹSNMP (RFC 1157 / RFC 1213)
Telnet / SSH (Secure Shell)

Power Supply:
Standard Input: - 48VDC / 100~240VAC / 802.3af PoE

Operation Environment:
Working Temperature Range:-35 ~ +70 oC
Relative Humidity:5 ~ 95 % (non-condensing)
Storage Temperature Range: -40 ~ +80 centigrade degrees

Dimension: 370 x 370 x 35 mm
Weight: 5.5 Kg
Product Frequency Range Antenna Gain Data Rate
WAP100a 5.180 ~ 5.825 GHz 26 dBi 54 ~ 300 Mbps