Prev

Next

Industrial-grade 4G router TCP/IP network architecture 1. Layering of TCP/IP network system   TCP/IP (TransmissionControlProtocol/InternetProtocol), transmission control protocol/Internet protocol. It was developed by the defense advanced research projects agency in the 1970s, and was later integrated into UNIX and popularized. It emerged in the 1980s as the Internet's...

更多文章

The structure of 4G DTU The main function of DTU is to transmit data from remote devices back to the background center via wired/wireless. Different data transmission modes of DTU include all-network-connected DTU, GPRS DTU, WIFI DTU, CAN DTU and 4G DTU. Today, we will have a look at the structure and work flow of DTU.   To complete...

更多文章

What are the wireless connection technologies of the... Internet of things (iot) applications have been deeply rooted in our lives. The E-Lins H685 industrial-grade router is a small industrial-grade wireless router with single or double LAN ports. TDD/ fdd-lte, 4G, 3G, GPRS network optional. Besides, what are the wireless connectivity technologies for the Internet of things?   1....

更多文章

The use of industrial wireless routers Industrial-grade wireless router adopts high performance 32-bit industrial-grade ARM9 communication processor, which is widely used in finance, electric power, postal, water conservancy, environmental protection, meteorology and other industries.   Industrial router is mainly used in intelligent transportation,...

更多文章

Cascade and stack of industrial-grade 4G routers The most basic star Ethernet architecture, the actual star enterprise network may be much more complex than this. This renaturation is not only reflected in how high-end network equipment, how complex configuration, more importantly, the performance of network switching level is more complex. Industrial routers and firewalls...

更多文章

twitter

PPPoE–Point-to-point protocol over Ethernet

文章目录 : 其他, 技术相关

The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating PPP frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packet sover the DSL connection to the ISP’s IP network, and from there to the rest of the Internet. A 2005 networking book noted that “Most DSL providers use PPPoE, which provides authentication, encryption, and compression.” Typical use of PPPoE involves leveraging the PPP facilities for authenticating the user with a username and password, predominately via the PAP protocol and less often via CHAP.

On the customer-premises equipment, PPPoE may be implemented either in a unified residential gateway device that handles both DSL modem and IP routing functions or in the case of a simple DSL modem (without routing support), PPPoE may be handled behind it on a separate Ethernet-only router or even directly on a user’s computer. (Support for PPPoE is present in most operating systems, ranging from Windows XP, Linux to Mac OS X.) More recently, some GPON-based (instead of DSL-based) residential gateways also use PPPoE, although the status of PPPoE in the GPON standards is marginal.

PPPoE was developed by UUNET, Redback Networks (now Ericsson) and RouterWare (now Wind River Systems) and is available as an informational RFC 2516.

In the world of DSL, PPPoE was commonly understood to be running on top of ATM (or DSL) as the underlying transport, although no such limitation exists in the PPPoE protocol itself. Other usage scenarios are sometimes distinguished by tacking as a suffix another underlying transport. For example, PPPoEoE, when the transport is Ethernet itself, as in the case of Metro Ethernet networks. (In this notation, the original use of PPPoE would be labeled PPPoEoA, although it should not be confused with PPPoA, which is a different encapsulation protocol.)

PPPoE has been described in some books as a “layer 2.5″ protocol, in some rudimentary sense similar to MPLS because it can be used to distinguish different IP flows sharing an Ethernet infrastructure, although the lack of PPPoE switches making routing decision based on PPPoE headers limits applicability in that respect.

发表评论

You must be logged in to post a comment.