Prev

Next

The detailed difference between 4G industrial router...   4G industrial router and 4G DTU both realize the wireless network data transmission function, and the differences between them are mainly from the use method, appearance interface and application environment, etc. Today, we will introduce some differences between 4G router and 4G DTU.   Different methods...

更多文章

Application analysis of iot sensing technology   The Internet of things (iot) is widely used in the integration of networks through intelligent perception, recognition technology, pervasive computing and other communication perception technologies. The iot is understood as "Internet connected by things". The Internet of things (iot) connects all objects with...

更多文章

What is a single/dual frequency wireless 4G router 1. Introduction to "single frequency" router The single-frequency router only works in the 2.4ghz band, which is generally supported by wireless terminals. However, the 2.4ghz band has large interference, which may affect the wireless rate and stability.   2. Introduction to "dual-frequency" router Dual-frequency...

更多文章

Wireless communication DTU features Data Transfer unit (DTU) is a wireless terminal device specially used to convert serial Data into IP Data or convert IP Data into serial Data for transmission through wireless communication network.   DTU advantages: Rapid and flexible network, short construction cycle, low cost; Wide network coverage; Good...

更多文章

The advantage of using wireless data transmission module... Data transmission can be simply divided into two major types: wired (including the installation of optical cables, cables or leased telecommunication lines) and wireless (including the establishment of dedicated wireless data transmission system or the borrowing of CDPD, GSM, CDMA and other public network information platforms).     In...

更多文章

twitter

How to Setup VPN Server in Windows Server

文章目录 : 技术相关

Windows Server support VPN Server features. Here let’s talk how to set up it.

Step1) Open “Server Manager“.

Step2) On the top menu, click on “Action” and “Add Roles“.

This will bring up the role installation wizard. On the first screen titled “Before your begin” read the requirements and click “Next” to continue.

Step3) Next, on the screen titled “Select Server Roles“, place check mark on “Network Policy and Access Services” and click “Next” to continue.

On the third screen titled “Network Policy and Access Services” read what it is stated and click “Next” to continue.

On the following screen titled “Select Role Services” place a check mark on “Routing and Remote Access Services” and make sure “Remote Access Service” and “Routing” are selected as well. Click “Next” to continue”.

Step4) Next, on the screen titled “Confirm Installation Selection“, you will get a summary of everything that will be installed. Make sure everything looks good and click on the “Install” button. Once the installation finishes, click “Close” to end the wizard.

Back on the main Server Manager window, right click on “Configure and Enable Routing and Remote Access“.

This will bring up the “Routing and Remote Access Wizard“. On the first window, click “Next“.

Step5) On the second window, select “Custom Configuration” and click “Next” to continue.

Step6) Next, place a check mark on “VPN access” and click “Next” to continue.

On the last screen of the wizard, click “Finish” and then click “Start Service” on the following window that will pop up.

Step7) Once the process is finished, and you are back on the main Server Manager window, routing and remote access should now be up and running.

Step8) Open Ports on the Firewall

For PPTP open:

Port 1723 TCP
Port 47 GRE

Step9) Give Domain Users Access to the VPN

If you are on a domain, go to your domain server, click on “Start“, “All Programs“, “Administrative Tools“, “Active Directory Users and Computers“.

Step10) On the left hand side column, look for your domain users. Double click on the user you want to give access to. This will bring up the properties for that user. Click on the “Dial-In” tab and under “Network Access Permission” select “Allow Access“. Click “Apply” and “Ok” to finish.

Repeat the same operation for all users on your network you want to give VPN access to. And that is it, as simple as that!

Now the VPN Server is set.

发表评论

You must be logged in to post a comment.