Prev

Next

The detailed difference between 4G industrial router...   4G industrial router and 4G DTU both realize the wireless network data transmission function, and the differences between them are mainly from the use method, appearance interface and application environment, etc. Today, we will introduce some differences between 4G router and 4G DTU.   Different methods...

更多文章

Application analysis of iot sensing technology   The Internet of things (iot) is widely used in the integration of networks through intelligent perception, recognition technology, pervasive computing and other communication perception technologies. The iot is understood as "Internet connected by things". The Internet of things (iot) connects all objects with...

更多文章

What is a single/dual frequency wireless 4G router 1. Introduction to "single frequency" router The single-frequency router only works in the 2.4ghz band, which is generally supported by wireless terminals. However, the 2.4ghz band has large interference, which may affect the wireless rate and stability.   2. Introduction to "dual-frequency" router Dual-frequency...

更多文章

Wireless communication DTU features Data Transfer unit (DTU) is a wireless terminal device specially used to convert serial Data into IP Data or convert IP Data into serial Data for transmission through wireless communication network.   DTU advantages: Rapid and flexible network, short construction cycle, low cost; Wide network coverage; Good...

更多文章

The advantage of using wireless data transmission module... Data transmission can be simply divided into two major types: wired (including the installation of optical cables, cables or leased telecommunication lines) and wireless (including the establishment of dedicated wireless data transmission system or the borrowing of CDPD, GSM, CDMA and other public network information platforms).     In...

更多文章

twitter

Enable-Network To A Bus

文章目录 : 技术相关

E-lins H685 and H820 router Application in Sydney’ bus.E-lins Perfect solution when we’re dealing with a constantly moving, rattling bus!

E-lins  Wireless has been dealing with that problem recently. It’s supplying the on-bus 3G Wi-Fi routers for Sydney’s Opal transport smartcard, which is supposed to catch NSW up to the rest of the nation by actually introducing a work on-train smartcard.

As part of a supply contract with Opal’s main developer Cubic Transportation Systems to fit out 5000 Sydney buses, E-lins had to customise one of its existing designs. Many of the features on the router would be recognisable in most networking contexts: it has eight on-board ports, and can switch between using Telstra’s 3G networks when on the road and Wi-Fi signal when in maintenance areas. But it also required some changes.

“We’ve specialised the device so that it copes with vehicles being turned on and off which can cause spikes and currents in the available power,” E-lins Wireless’s Evan zou told us. “It’s also vibration-proof.”

The bus rollout is currently half-completed (though only two routes in Sydney are active), and scheduled to finish by the end of 2014.

发表评论

You must be logged in to post a comment.