Prev

Next

Industrial-grade 4G router TCP/IP network architecture 1. Layering of TCP/IP network system   TCP/IP (TransmissionControlProtocol/InternetProtocol), transmission control protocol/Internet protocol. It was developed by the defense advanced research projects agency in the 1970s, and was later integrated into UNIX and popularized. It emerged in the 1980s as the Internet's...

更多文章

The structure of 4G DTU The main function of DTU is to transmit data from remote devices back to the background center via wired/wireless. Different data transmission modes of DTU include all-network-connected DTU, GPRS DTU, WIFI DTU, CAN DTU and 4G DTU. Today, we will have a look at the structure and work flow of DTU.   To complete...

更多文章

What are the wireless connection technologies of the... Internet of things (iot) applications have been deeply rooted in our lives. The E-Lins H685 industrial-grade router is a small industrial-grade wireless router with single or double LAN ports. TDD/ fdd-lte, 4G, 3G, GPRS network optional. Besides, what are the wireless connectivity technologies for the Internet of things?   1....

更多文章

The use of industrial wireless routers Industrial-grade wireless router adopts high performance 32-bit industrial-grade ARM9 communication processor, which is widely used in finance, electric power, postal, water conservancy, environmental protection, meteorology and other industries.   Industrial router is mainly used in intelligent transportation,...

更多文章

Cascade and stack of industrial-grade 4G routers The most basic star Ethernet architecture, the actual star enterprise network may be much more complex than this. This renaturation is not only reflected in how high-end network equipment, how complex configuration, more importantly, the performance of network switching level is more complex. Industrial routers and firewalls...

更多文章

twitter

E-Lins New Product H685 WRT Quick Start

文章目录 : 产品文章

Before Installation and Configuration

1. H685 router has different version. Study your router version before installation.

2. For GSM/GPRS/EDGE/HSDPA/HSUPA/HSPA/HSPA+/4G LTE version, please get a SIM card with data business.

3. For CDMA2000 EVDO/CDMA1x version, please get a UIM card with data business or inform us before order if the network uses non-ruim (nam-flashing).

4. Make sure the sim card or uim card is with enough data business and balance.

5. Make sure the signal is good enough where you test or install the router. Weak signal will make the router no work. If you find your signal strength is not good, please contact us for high gain antenna.

6. Different countries and carriers use different network band and frequency. E-Lins packs units with free world-wide-use antenna. It can work, but the data speed or signal may not be good at your sites. Please buy dedicated high gain antenna from your local suppliers or contact E-Lins to OEM/ODM the antenna.

Notes: This quick start is for GSM/GPRS/EDGE/HSDPA/HSUPA/HSPA+/TD-SCDMA/4G LTE network only. For EVDO network or CDMA network, please refer to manual or contact us freely.

Step 1) Confirm the sim card if can work with other 2G/3G/4G router or modem. If the sim card can not work, the router will not work correctly.

Step 2) Connect the H685 Router LAN port to a PC via RJ45 cable. Make the PC automatically to get the IP, Submask, DNS.

 The PC will be get a IP of 192.168.1.xxx.

Step 3) At PC web browser, please type: http://192.168.1.1

Username: admin      Password: admin

Step 4) System – Setup Wizard

4.1) General

 1

a) Set the Web Login password;
b) Sync with system time with clicking “Sync with browser”, or select the “Timezon”;
c) Click “Save & Apply” button for next step;

 4.2) Mobile

 2

Item

Description

Enable

Check it

Mobile connection

Normally system will automatically select

APN

Fill in the right parameters. Get this parameter from the Sim Card Provider or Carrier;

PIN number

If the SIM card uses PIN code, please put here. Wrong PIN code makes router no work.
If the SIM card doesn’t use PIN code, please keep blank here.

Dialing number

Fill in the right parameters. Get this parameter from the Sim Card Provider or Carrier. With experience, most of time, 2G/3G/4G use *99#, and CDMA/EVDO use #777.

Authentication method

Fill in the right parameters. Get this parameter from the Sim Card Provider or Carrier;

None

No more settings

CHAP

Need set “Username” and “Password”

PAP

Need set “Username” and “Password”

Service Type

Select the network you want to use. Normally keep default settings

Demand

Normally keep default settings

MTU

Normally keep default settings

Click “Save & Apply” button for next step;

4.3) LAN

 3

Set the router LAN IP parameters. Click “Save & Apply” button for next step;

4.4) WiFi

4

Notes: for security, it is highly recommend to set “Encryption” for the WiFi Radio.

 

Step 5) once the router is online, it gets a WAN IP Address and Status Page will show similar info, also the “Cell LED” will light on. And “Cell Signal LED” flash if there is enough signal.

Level

Signal Strength Value

Cell Signal LED Flashing Speed

1

1-4

Flash per 2 seconds

2

5-17

Flash per 1 second

3

18-31

Flash per 0.5 second

 

5.1) Status – Overview

 5

Step 6) In order to keep the router working stably, it’s highly recommended to activate the “ICMP Check” feature.

       6

Notes:

1) For router working with best stability, we highly suggest activate and use this feature. With this feature, the Router will automatically detect its working status and fix the problem.

2) You can fill in Host1 only, also you can fill in Host1 and Host2 together.

Below list the ICMP checking principle diagram.

 

 7

 

 

发表评论

You must be logged in to post a comment.