Prev

Next

伊林思_工业无线路由器OSPF链路类型(Link... 工业无线路由器OSPF链路类型(Link Type) 巧玲珑OSPF确实因为考虑问题的全面,而导致路由协议的复杂,OSPF不仅因为不同的二层链路层介质定义了不同的OSPF网络类型(Network Type),还因为链路上的邻居,而定义了OSPF链路类型(Link Type) 。 OSPF网络类型(Network...

更多文章

工业路由器的Network Summary LSA 工业路由器:Network Summary LSA ABR工业级路由器始发,用于通告该区域外部的目的地址, 可以使用show ip ospf database summary查看LSA 如果ABR知道有多条路径可以到达目标地址,但是它仍然只发送单个的Network Summary LSA,并且是开销最低的那条;同样,如果ABR从其他的ABR那里收到多条Network...

更多文章

工业4G路由器BGP邻居的flaping •工业路由器通过IGP学到对方loopback,并用looback建EBGP邻居 •又在BGP中通告此loopback。此时BGP邻居会出现flaping R1和R2之间运行一个IGP协议,比如说EIGRP。将环回口都宣告进去,这样R1和R2相互之间就有对方环回口的工业级路由器路由了,然后再用环回口建立EBGP邻居关系。最后再把2.2.2.0和1.1.1.0的环回口宣告进BGP。这时你会发现工业无线路由器BGP路由会发生flapping。 原因一:无线路由器 •首先R1和R2之间运行了EIGRP,学到对方的环回口工业级无线路由器路由是一条EIGRP路由,管理距离是90 •而当这两个环回口宣告进BGP后,R1和R2又通过BGP学到对方环回口路由,管理距离是20 •这时,全网工业级路由器BGP路由由于管理距离最小,会进入全网工业路由器路由表,取代EIGRP路由 •问题在于,现在的全网通工业路由器BGP路由是有问题的,下一跳是不可达的 R2收到的1.1.1.0的BGP路由下一跳是R1的环回口1.1.1.1 R1收到的2.2.2.0的BGP路由下一跳是R2的环回口2.2.2.2 •BGP有一个检查机制,每60S检查一次BGP路由,看是否有效,60S后就会检查到这些工业级全网通路由器路由并设为无效 •BGP路由无效以后,在路由表中就没有了,EIGRP路由又起作用了。 •有了EIGRP路由,BGP路由的下一跳有可达了。又有效了。 •BGP邻居有效以后,又会抢占了EIGRP路由的地位,又会导致全网通工业级路由器BGP路由下一跳不可达。 原因二:4g路由器 •首先R1和R2之间运行了EIGRP,学到对方的环回口工业全网通路由器路由是一条EIGRP路由,管理距离是90 •而当这两个环回口宣告进BGP后,R1和R2又通过BGP学到对方环回口路由,管理距离是20 •这时,工业级全网路由器BGP路由由于管理距离最小,会进入路由表,取代EIGRP路由 •问题在于,现在的工业4G路由器BGP路由是有问题的,下一跳是不可达的 R2收到的1.1.1.0的工业级4G路由器BGP路由下一跳是R1的环回口1.1.1.1 R1收到的2.2.2.0的BGP路由下一跳是R2的环回口2.2.2.2 •路由不可达就造成两个邻居之间没法发送keeplive •180S后BGP邻居关系超时,并DOWN掉。这时EIGRP路由又起作用了。 •有了EIGRP路由,BGP邻居关系又可以建立了。 •BGP邻居有效以后,工业全网路由器BGP路由又会抢占了EIGRP路由的地位,又会导致BGP邻居再一次DOWN掉。 标签:全网通路由器 ...

更多文章

工业路由器OSPF建立邻居到LSA的互换的交换过程 从工业路由器OSPF建立邻居,到LSA的互换,到路由表的计算,需要经过一系列的工业级路由器数据包交换过程,过程如下: Hello ↓ Database Description Packets (DBD) ↓ Link-state Request (LSR) ↓ Link-state update(LSU) ↓ LSDB 具体情况如下: Hello Hello包是用来建立和维护工业无线路由器OSPF邻居的,要交换LSA,必须先通过Hello包建立工业级无线路由器OSPF邻居。 Database...

更多文章

伊林思:工业4g路由器区域分离你清楚吗? 工业4g路由器区域分离 区域分离的操作与区域合并的正好相反。区域分离可以将原有的一个区域分离为两个不同的区域。如下图所示,R1与R2都为L1/2工业路由器。起初R1和R2属于同一个区域中,都拥有相同的区域地址49.0001,之间形成了L1和L2邻接关系,共享相同的L1和L2链路状态数据库。现在需要将这两个区域分离开。与区域合并一样,可以先赋予R2两个全网通工业路由器NET地址,区域地址分别为49.0001和49.0002。之后再将R2原先区域地址为49.0001的NET地址删除,这时由于R1和R2处于不同的区域,L1邻接关系将不存在,但L2邻接关系和L2链路状态数据将保留,此时便完成了全网通工业级路由器区域分离。 重编址 重编址过程与区域合并、区域分离相似,重编址可能需要清除一些或者全部工业级路由器的区域前缀,用新的区域前缀代替。如下图所示,现在希望将原先的49.0001区域迁移到49.0002区域,这就需要更改工业级无线路由器上的区域地址。R1和R2属于同一个区域49.0001中,要将R1和R2迁移到49.0002区域中,可以为R1和R2都赋予两个NET地址,两个NET地址包含不同的区域地址,49.0001和49.0002,然后依次删除R1和R2的包含49.0001区域地址的NET地址,这样就实现了工业无线路由器新的NSAP地址的无缝、无冲突的重新配置。 注意,IS-IS多宿主与IP中的辅助地址(secondanaryIP)是不同的,辅助地址可以在同一条工业级全网通路由器链路上创建多个隔离的逻辑子网。另外,辅助IP地址是在一条链路上配置多个子网。 工业无线路由器NSEL NSEL定义了网络层服务的用户,工业全网通路由器路由层是特殊的网络层服务用户,它的NSEL值为0。之前多次提到,在IS-IS工业4G路由器上配置的NSAP地址采用00作为NSEL,这时NSAP地址被称为NET。NSEL的值与IP报头中的协议类型或TCP/UDP报头中的TCP、UDP端口号类似,NSEL帮助网络层把数据发送到适当的应用程序或服务。在OSI分层模型中,网络层服务的是传输层。目标不是路由进程的CLNP数据包具有非0的NSEL值的NSAP地址,表示节点需要将数据发送到传输层。我们在使用IS-IS进行工业级4G路由器IP路由选择中,只要记住始终保持NSEL为00即可。全网通4g路由器

更多文章

twitter

Orange helps Sensile Tech monitor Oil & Gas with M2M

Category : 其他, 技术相关

About Sensile Technologies

Sensile Technologies is a forerunner in the Internet of Things (IoT) market and a leading provider of solutions for remote monitoring of tank levels for the oil and propane industry. Founded in 1999 and based in Morges, Switzerland, Sensile Technologies has extensive experience in high-quality product development and production as well as reliable service and support. They are an innovative company with four world premieres under their belt. All of their products are Swiss made and certified for hazardous environments.

 

About Orange Business Services

Orange Business Services, the Orange branch dedicated to B2B services, is not only a telecom operator, but also an IT solutions integrator and applications developer in France and around the world. Its 20,000 employees support companies in all areas of their digital transformation: mobile and collaborative workspaces; IT/cloud infrastructure; fixed and mobile connectivity; private and hybrid networks; applications for Internet of Things, 360° customer experience and Big Data analytics; and cybersecurity thanks to dedicated experts and infrastructure to protect information systems. More than 3,000 multinational organizations and 2 million SOHOs, enterprises and local authorities in France rely on Orange Business Services as their trusted partner.

 

Orange is one of the world’s leading telecommunications operators with annual sales of 40 billion euros in 2015 and has 155,000 employees worldwide at 31 March 2016. Orange is listed on the NYSE Euronext Paris (symbol ORA) and on the New York Stock Exchange (symbol ORAN).

Orange and any other Orange product or service names included in this material are trademarks of Orange or Orange Brand Services Limited.

 

 

Orange Business Services has won a three-year contract with Sensile Technologies for M2M connectivity, including 25,000 SIM cards, to support its two remote monitoring products worldwide: NETRIS®2 and GASLink®

Headquartered in Morges, Switzerland, Sensile Technologies is a pioneer in the internet of things (IoT) market. Specifically, it is a leading provider of solutions for the remote monitoring of tanks and meters in the oil and gas industry. Sensile Technologies monitors more than 60,000 tanks in industrial and business facilities across 60 countries, via a global network of highly-qualified technicians and local partners.

Up to now, Sensile Technologies used 2G compatible devices to power its telemetry solutions. The contract with Orange Business Services extends this to cover 3G/4G devices, which future-proofs the solutions against 2G network shutdown and ensures seamless global coverage.

Sensile Technologies’ telemetry solutions, GASLink® and NETRIS®2, play a key role in the monitoring process. They are installed directly in the oil or propane tank and regularly send tank level measurements via the GSM network to the cloud, where the data is automatically processed.

The up-to-date tank level data allows oil and propane merchants – and their haulers – to arrange deliveries automatically via planning tools. They get data directly in their enterprise resource planning (ERP) system from Sensile Technologies’ Oil Link cloud solution to trigger deliveries automatically. In addition, their customers can get access on smartphones to monitor consumption.

Thanks to the optimization of deliveries based on live data, merchants and haulers can lower their logistics costs by at least 25 percent, without the risk of customers running dry. In addition to mitigating the risk of running out of fuel, customers are also able to access a detailed visualization and analysis of their logistics, enabling them to adapt their processes to reduce their costs further.

“Leading oil and propane companies rely on our autonomous, robust, and easy to install systems. We have more than 60,000 in place on tanks in over 60 countries. Orange Business Services has proven itself as a reliable partner with the global footprint we need for our business. Their competitive flat-fee pricing was convincing as well,” said Jean-Marc Uehlinger, Operational Director, Sensile Technologies.

“With its telemetry solutions Sensile Technologies is helping drive the latest revolution in industry. In Industry 4.0 every part of the enterprise and each phase of the manufacturing cycle will be connected. The internet of things (IoT) and M2M play a key part in this revolution, and we manage 10 million connected objects for our customers worldwide, including over 7 million active SIM cards,” Anne-Sophie Lotgering, senior vice president Europe, Russia & CIS, Orange Business Services.

GASLink® and NETRIS®2 are the result of 15 years’ experience from Sensile Technologies in the development and production of autonomous telemetry equipment. In addition to using the 2G (SMS) network to transmit data, NETRIS®2 can also use 3G or 4G, as well as create a short-distance radio frequency connection, which functions in every location.