Prev

Next

What are the wireless connection technologies of the... Internet of things (iot) applications have been deeply rooted in our lives. The E-Lins H685 industrial-grade router is a small industrial-grade wireless router with single or double LAN ports. TDD/ fdd-lte, 4G, 3G, GPRS network optional. Besides, what are the wireless connectivity technologies for the Internet of things?   1....

更多文章

The use of industrial wireless routers Industrial-grade wireless router adopts high performance 32-bit industrial-grade ARM9 communication processor, which is widely used in finance, electric power, postal, water conservancy, environmental protection, meteorology and other industries.   Industrial router is mainly used in intelligent transportation,...

更多文章

Cascade and stack of industrial-grade 4G routers The most basic star Ethernet architecture, the actual star enterprise network may be much more complex than this. This renaturation is not only reflected in how high-end network equipment, how complex configuration, more importantly, the performance of network switching level is more complex. Industrial routers and firewalls...

更多文章

The difference between 4G router and 4G DTU 4G industrial wireless router and 4G DTU are also used for wireless network data transmission of industrial equipment. But there are also significant differences between the two, and the differences between the two are mainly from the appearance of the interface, the use of methods and the application environment.   1....

更多文章

Characteristics and differences between RS485 and RS232 RS232 and RS485 have always been the weak current common interface, but there are a lot of people do not understand the difference between them is not very thorough.   I. overview of RS485   RS-485 serial bus is widely used when the communication distance is tens of meters to thousands of meters. RS-485...

更多文章

twitter

设置路由器串联使用的实用教程

文章目录 : 技术相关

设置路由器串联使用的实用教程发布于2015年1月27日下午,谢谢你光临本站,我们公司提供以下产品与服务:
工业路由器
lte路由器
4g路由器
3g路由器
有需要这联系我们的在线客服,我们将全心全意为您服务。

设置路由器串联使用的实用教程
路由器可以串联起来使用。当你有两个路由器,正好又需要串起来使用,该如何设置?两个路由器同时使用的情况下,有两种方式连接:
一、一个设备为交换机,另一个设备为路由器
需要注意的地方:该连接方式下,没有使用路由器B的WAN口,同样需要更改LAN的地址,不要与前端路由器A的管理地址192.168.1.1冲突,可以设为192.168.1.2,即可处于同一网段,但不要重复。
具体连接方式如下:ADSL—-路由A的WAN口—-LAN口—–路由B的LAN口—-LAN口—-计算机
二、两个设备都为当路由器使用。
该方式连接两个设备都工作在路由模式,路由器B要更改LAN的地址,不能与前端路由器A处于同一网段,可更改为192.168.2.1。
具体连接方式如下:ADSL—-路由A的WAN口—-LAN口—–路由B的WAN口—-LAN口—-计算机
这两种方法都可以解决问题,本人建议使用第一种方法,比较第二种方法需要的情况不多。

发表评论

You must be logged in to post a comment.