Prev

Next

The similarities and differences between industrial... 1. definition of industrial 4G router and industrial switch   Industrial 4G router:   Industrial 4G router is a network device responsible for path finding. It provides users with communication by finding the least communication from multiple paths in the interconnection network. Industrial 4G router...

更多文章

4g router features of E-lins Technology With the development of new communication technologies and the continuous improvement of network efficiency and function of wireless communication, 4G has been widely used. 4G industrial-grade wireless routers are playing an increasingly important role in the applications of various industries, and the price is getting...

更多文章

E-Lins Industrial router applications Industrial-grade routers as Internet network layer communication equipment application in all walks of life, brought a lot of convenience for our industry. "E-Lins" introduce the application of industrial router scenario analysis.   1 The self-service terminal network   E-lins industrial router networking...

更多文章

Classification of 4G industrial routers There are many types of 4G industrial routers, which can be divided into different categories from different perspectives. Different types of 4G industrial routers can be used in different environments. The following sections classify the 4G industrial routers from different perspectives. According to the performance From...

更多文章

Dual SIM Router vs. Dual Radio Router Projects are looking to save their enterprises time and money ask us this very often: “When would I need to use dual SIMs, and in what situations should I consider dual radio dual sim router?” In order to make this clear, let’s take a quick look at the dual SIM and dual SIM dual radio module functionality. Dual...

更多文章

twitter

电脑连接不了路由器 复位快又直接

文章目录 : 技术相关

电脑连接不了路由器 复位快又直接
如果你的电脑无法登陆路由器的管理界面,首先你应检查电脑与路由器的物理连接是否正常,以及电脑各项网络参数设置是否正确。
其次,如果依旧无法登陆路由器界面,可能是因为修改了路由器的IP地址,您可以将路由器复位,复位方法如下:
1.具有SYS灯的路由器复位方法
首先关闭路由器的电源,找一如笔尖类的尖物按住Reset键(Reset键在路由器的前/后面板上有一个小孔,旁有单词:Reset);然后重新插上电源,当观察到SYS指示灯闪烁后,松开RESET按钮,路由器将恢复到出厂状态。
2.具有M1、M2灯的TL-R4XX路由器复位方法
跟第一种方法一样,找一如笔尖类的尖物按住Reset键(Reset键在路由器的前/后面板上有一个小孔,旁有单词:Reset);重新插上电源,等待约3-10秒钟,待M1和M2灯同时闪烁三次后可松手,复位成功。
最后,教您正确连接路由器线路的图示方法:
1、从猫引出来的网线接路由器WAN口,电脑使用网线连接到路由器的LAN的1-4端口.
2、若SYS等常亮或者熄灭,表明路由器出现故障;LAN或者WAN指示灯不亮,请检查物理连接是否接好,比如没有接网线或者是网线与接口接触不良;若连接正常但指示灯不亮,则可能是网线问题,建议您更换网线。
检查指示灯,路由器运行正常情况下,电源指示灯(PWR)常亮,系统指示灯(SYS)闪烁,WAN端口以及LAN端口常亮或者闪烁。

发表评论

You must be logged in to post a comment.