Prev

Next

The detailed difference between 4G industrial router...   4G industrial router and 4G DTU both realize the wireless network data transmission function, and the differences between them are mainly from the use method, appearance interface and application environment, etc. Today, we will introduce some differences between 4G router and 4G DTU.   Different methods...

更多文章

Application analysis of iot sensing technology   The Internet of things (iot) is widely used in the integration of networks through intelligent perception, recognition technology, pervasive computing and other communication perception technologies. The iot is understood as "Internet connected by things". The Internet of things (iot) connects all objects with...

更多文章

What is a single/dual frequency wireless 4G router 1. Introduction to "single frequency" router The single-frequency router only works in the 2.4ghz band, which is generally supported by wireless terminals. However, the 2.4ghz band has large interference, which may affect the wireless rate and stability.   2. Introduction to "dual-frequency" router Dual-frequency...

更多文章

Wireless communication DTU features Data Transfer unit (DTU) is a wireless terminal device specially used to convert serial Data into IP Data or convert IP Data into serial Data for transmission through wireless communication network.   DTU advantages: Rapid and flexible network, short construction cycle, low cost; Wide network coverage; Good...

更多文章

The advantage of using wireless data transmission module... Data transmission can be simply divided into two major types: wired (including the installation of optical cables, cables or leased telecommunication lines) and wireless (including the establishment of dedicated wireless data transmission system or the borrowing of CDPD, GSM, CDMA and other public network information platforms).     In...

更多文章

twitter

新装系统路由器配置方法

文章目录 : 技术相关

新装系统路由器配置方法
随着应用win7系统的人越来越多,对于这个系统的应用就更多了,其中大家最关注的就是这个系统和路由器上网的问题。下面,我们就来讲解一下win7系统的路由器的设置过程。
首先打开浏览器,在地址栏输入192.168.1.1之后会弹出对话框,接着输入账号和密码,只要没有设置过,一般的路由器账号和密码都是admin。
再登陆路由器的界面之后出现设置路由器的界面,选择好上网方式,点击下一步,接着继续点击下一步输入必要的上网账户信息再次点击下一步,然后进入无线设置,点击下一步,然后开启DHCP功能(一般是点击系统的右下角的图标)。
最后,右键打开网络中心选择本地连接,回到浏览器选择点击完成就OK咯!

发表评论

You must be logged in to post a comment.