Prev

Next

What are the wireless connection technologies of the... Internet of things (iot) applications have been deeply rooted in our lives. The E-Lins H685 industrial-grade router is a small industrial-grade wireless router with single or double LAN ports. TDD/ fdd-lte, 4G, 3G, GPRS network optional. Besides, what are the wireless connectivity technologies for the Internet of things?   1....

更多文章

The use of industrial wireless routers Industrial-grade wireless router adopts high performance 32-bit industrial-grade ARM9 communication processor, which is widely used in finance, electric power, postal, water conservancy, environmental protection, meteorology and other industries.   Industrial router is mainly used in intelligent transportation,...

更多文章

Cascade and stack of industrial-grade 4G routers The most basic star Ethernet architecture, the actual star enterprise network may be much more complex than this. This renaturation is not only reflected in how high-end network equipment, how complex configuration, more importantly, the performance of network switching level is more complex. Industrial routers and firewalls...

更多文章

The difference between 4G router and 4G DTU 4G industrial wireless router and 4G DTU are also used for wireless network data transmission of industrial equipment. But there are also significant differences between the two, and the differences between the two are mainly from the appearance of the interface, the use of methods and the application environment.   1....

更多文章

Characteristics and differences between RS485 and RS232 RS232 and RS485 have always been the weak current common interface, but there are a lot of people do not understand the difference between them is not very thorough.   I. overview of RS485   RS-485 serial bus is widely used when the communication distance is tens of meters to thousands of meters. RS-485...

更多文章

twitter

教大家如果管理员忘记工业4G路由器管理密码怎么办?

文章目录 : 产品文章

  工业4G路由器的管理员密码能够登录到工业4G路由器,从而管理工业4G路由器,可是如果管理员密码忘记了怎么办呢?下面小篇就来教大家。

  在工业4G路由器通电的情况下,按紧工业4G路由器背面的RESET按钮8秒,等到所有指示灯闪烁后松手即可恢复出厂设置。

  恢复出厂设置后,工业4G路由器的所有配置都丢失,这时需要重新设置工业4G路由器,工业4G路由器的SSID和原始管理密码在工业4G路由器的底部可以找到。(MAC后6位或4位是SSID)

  接着我们设置好工业4G路由器,为了防止管理员密码再次忘记,可以记录下来,为了方便下次设置路由,可以备份工业4G路由器配置。设置方法:打开工业4G路由器的管理界面,点击左侧的系统工具。

  点击备份和载入配置。

  点击备份配置文件,这个配置文件要保留好,以后设置工业4G路由器可以直接导入它,就不用手动设置了。

  如要导入配置文件,就在路径这一项中选择工业4G路由器配置文件即可。

  标签:工业路由器    无线路由器

发表评论

You must be logged in to post a comment.