Prev

Next

The advantage of using wireless data transmission module... Data transmission can be simply divided into two major types: wired (including the installation of optical cables, cables or leased telecommunication lines) and wireless (including the establishment of dedicated wireless data transmission system or the borrowing of CDPD, GSM, CDMA and other public network information platforms).     In...

更多文章

Industrial-grade 4G router TCP/IP network architecture 1. Layering of TCP/IP network system   TCP/IP (TransmissionControlProtocol/InternetProtocol), transmission control protocol/Internet protocol. It was developed by the defense advanced research projects agency in the 1970s, and was later integrated into UNIX and popularized. It emerged in the 1980s as the Internet's...

更多文章

The structure of 4G DTU The main function of DTU is to transmit data from remote devices back to the background center via wired/wireless. Different data transmission modes of DTU include all-network-connected DTU, GPRS DTU, WIFI DTU, CAN DTU and 4G DTU. Today, we will have a look at the structure and work flow of DTU.   To complete...

更多文章

What are the wireless connection technologies of the... Internet of things (iot) applications have been deeply rooted in our lives. The E-Lins H685 industrial-grade router is a small industrial-grade wireless router with single or double LAN ports. TDD/ fdd-lte, 4G, 3G, GPRS network optional. Besides, what are the wireless connectivity technologies for the Internet of things?   1....

更多文章

The use of industrial wireless routers Industrial-grade wireless router adopts high performance 32-bit industrial-grade ARM9 communication processor, which is widely used in finance, electric power, postal, water conservancy, environmental protection, meteorology and other industries.   Industrial router is mainly used in intelligent transportation,...

更多文章

twitter

伊林思:工业4g路由器区域分离你清楚吗?

文章目录 : 产品文章

工业4g路由器区域分离

区域分离的操作与区域合并的正好相反。区域分离可以将原有的一个区域分离为两个不同的区域。如下图所示,R1与R2都为L1/2工业路由器。起初R1和R2属于同一个区域中,都拥有相同的区域地址49.0001,之间形成了L1和L2邻接关系,共享相同的L1和L2链路状态数据库。现在需要将这两个区域分离开。与区域合并一样,可以先赋予R2两个全网通工业路由器NET地址,区域地址分别为49.0001和49.0002。之后再将R2原先区域地址为49.0001的NET地址删除,这时由于R1和R2处于不同的区域,L1邻接关系将不存在,但L2邻接关系和L2链路状态数据将保留,此时便完成了全网通工业级路由器区域分离。

重编址

重编址过程与区域合并、区域分离相似,重编址可能需要清除一些或者全部工业级路由器的区域前缀,用新的区域前缀代替。如下图所示,现在希望将原先的49.0001区域迁移到49.0002区域,这就需要更改工业级无线路由器上的区域地址。R1和R2属于同一个区域49.0001中,要将R1和R2迁移到49.0002区域中,可以为R1和R2都赋予两个NET地址,两个NET地址包含不同的区域地址,49.0001和49.0002,然后依次删除R1和R2的包含49.0001区域地址的NET地址,这样就实现了工业无线路由器新的NSAP地址的无缝、无冲突的重新配置。

注意,IS-IS多宿主与IP中的辅助地址(secondanaryIP)是不同的,辅助地址可以在同一条工业级全网通路由器链路上创建多个隔离的逻辑子网。另外,辅助IP地址是在一条链路上配置多个子网。

工业无线路由器NSEL

NSEL定义了网络层服务的用户,工业全网通路由器路由层是特殊的网络层服务用户,它的NSEL值为0。之前多次提到,在IS-IS工业4G路由器上配置的NSAP地址采用00作为NSEL,这时NSAP地址被称为NET。NSEL的值与IP报头中的协议类型或TCP/UDP报头中的TCP、UDP端口号类似,NSEL帮助网络层把数据发送到适当的应用程序或服务。在OSI分层模型中,网络层服务的是传输层。目标不是路由进程的CLNP数据包具有非0的NSEL值的NSAP地址,表示节点需要将数据发送到传输层。我们在使用IS-IS进行工业级4G路由器IP路由选择中,只要记住始终保持NSEL为00即可。全网通4g路由器

发表评论

You must be logged in to post a comment.