Prev

Next

What are the wireless connection technologies of the... Internet of things (iot) applications have been deeply rooted in our lives. The E-Lins H685 industrial-grade router is a small industrial-grade wireless router with single or double LAN ports. TDD/ fdd-lte, 4G, 3G, GPRS network optional. Besides, what are the wireless connectivity technologies for the Internet of things?   1....

更多文章

The use of industrial wireless routers Industrial-grade wireless router adopts high performance 32-bit industrial-grade ARM9 communication processor, which is widely used in finance, electric power, postal, water conservancy, environmental protection, meteorology and other industries.   Industrial router is mainly used in intelligent transportation,...

更多文章

Cascade and stack of industrial-grade 4G routers The most basic star Ethernet architecture, the actual star enterprise network may be much more complex than this. This renaturation is not only reflected in how high-end network equipment, how complex configuration, more importantly, the performance of network switching level is more complex. Industrial routers and firewalls...

更多文章

The difference between 4G router and 4G DTU 4G industrial wireless router and 4G DTU are also used for wireless network data transmission of industrial equipment. But there are also significant differences between the two, and the differences between the two are mainly from the appearance of the interface, the use of methods and the application environment.   1....

更多文章

Characteristics and differences between RS485 and RS232 RS232 and RS485 have always been the weak current common interface, but there are a lot of people do not understand the difference between them is not very thorough.   I. overview of RS485   RS-485 serial bus is widely used when the communication distance is tens of meters to thousands of meters. RS-485...

更多文章

twitter

串联两个路由器如何上网

文章目录 : 技术相关

串联两个路由器如何上网
在我们上网的时候通常会发现这样的一种情况,在一根网线已经链接到了一个路由器的接口之后,我们姑且将它称之为路由器A,在路由器A再分出一根线还要链接另外一个路由器,我们称之为路由器B,那么问题是这个路由器…
在我们上网的时候通常会发现这样的一种情况,在一根网线已经链接到了一个路由器的接口之后,我们姑且将它称之为路由器A,在路由器A再分出一根线还要链接另外一个路由器,我们称之为路由器B,那么问题是这个路由器B该怎样实现正常的上网功能呢?
今天我们来谈一下利用两台路由器,网线和电脑这三者的链接方式和设置办法,从而实现最终的双重上网功能。具体的步骤是:首先需要查看一下两款路由器的IP地址是否一致,如果不相同的话那么可以跳过这步,实际上一般的路由器的IP是192.168.0.1。接着进入路由器B的管理界面,找到路由器B的LAN接口,并将路由器B的IP地址设置为192.168.1.1,然后保存。那么以后路由器B的IP就变成了重新设置好的这个地址了。
接着,让让路由器A连接到网络并进入路由器A的管理界面,同时将DNS和子网掩码等信息复制,并在界面上显示出来。然后,将路由器A的LAN口分出来的网线连接到路由器B的WAN接口上,最后在浏览器中输入设置之后的IP地址再进入路由器B。在路由器B中找到其WAN接口,将之设置为静态IP。
将路由器A的 LAN口分出的网线连接到路由器B的WAN口上,再到浏览器中输入修改后的IP地址进入路由器B的管理界面192.168.0.X,这个叉一般表示的是22到254之间任何的参数。其中,子网掩码和DNS的信息与路由器A相同,网关设置为路由器A的管理IP地址,将设置好的IP地址点击保存。
到了此刻,两台路由器就实现了串接,一般当路由器A上网的时候,路由器B连接到电脑之后同样也就可以上网了。

发表评论

You must be logged in to post a comment.